XSW-D MINI JACK RX
XSW-D receiver with 3.5mm (1/8”) output
DKK 1,359.10
inkl. moms
Varenummer 508500
Find forhandler
XSW-D MINI JACK RX
DKK 1,359.10
inkl. moms

XSW-D receiver with 3.5mm (1/8”) output

Reviews
Be the first to write a review.

Specifications
Kassen indeholder
Support
Kontakt os
Product Support Phone

+45 70 26 66 33


FAQ
  • How do I pair an additional component to my existing system?
    Start with both devices powered off. Press and hold the power buttons on selected transmitter and receiver for (minimum of) 5 seconds to enable pairing on the devices.  Both indicators will flash green and red, then turn solid green when pairing is complete.

  • How many transmitters can I pair with my receiver?
    Up to four transmitters can be paired with a receiver. Note, only one transmitter may be used at a time.

  • Can I send audio from one transmitter to multiple receivers simultaneously?
    No, XS Wireless Digital creates a point-to-point paired connection between a single transmitter and single receiver.

  • The Portable ENG Set comes with two transmitters and one receiver. Can I use both transmitters simultaneously?
    No, only one transmitter can be connected to the receiver at a time. Both transmitters have been pre-paired to the receiver from the factory, enabling plug and play operation with either device.

  • Do I need a license to use this system?
    No, XS Wireless Digital operates in the 2.4GHz frequency range for worldwide license-free use.

  • I lost an accessory. Can I replace it?
    Yes, all XS Wireless Digital accessories are available separately. You can purchase additional transmitters and receivers, belt clips, camera adapters, and connecting cables as needed.

  • What kind of microphones can be used with the XLR plug-on transmitter?
    Any dynamic microphone (or battery-powered condenser microphone) will work with the XLR plug-on.

  • What kind of microphones can be used with the 3.5mm Mini Jack transmitter?
    The 3.5mm Mini Jack transmitter is compatible with most common lapel mics and headmics.

  • Will the Instrument Set work with all styles of guitar and bass pick-ups and plug-styles?
    The 6.3mm (1/4 inch) jack connector has a 90-degree range of motion, allowing it to be plugged into a wide range of instruments with side, top or even recessed input jacks.  In the event that the transmitter does not fit into a specific instrument, an extension cable is provided, which allows the transmitter to be clipped to the strap.

  • Can I use the Ci1 instrument cable with the 3.5mm input on the Mini Jack Transmitter?
    No, the Ci1 instrument cable (included in analog XS Wireless and evolution wireless instrument sets) is not compatible with XS Wireless Digital. For instrument connections via 6.3mm (1/4 inch) jack, please use the dedicated instrument transmitter.

  • Can I connect XS Wireless Digital to my computer via the USB cable?
    XS Wireless components can be charged via a computer's USB port, but audio is not passed to or from a computer via USB.

Downloads

  • Transportinformationer for litium-ion-batterier
    • Transport information for Lithium-Ion batteries (570 KB) Download

      Revision Date: 2020-02-09 Revision Number: 1.0

  • Quick-guides
    • Quick Guide XS Wireless Digital (1.3 MB) Download

  • Specifikationer
    • Product specification XSW-D Mini Jack Receiver (250 KB) Download

  • Instruktionsmanual
    • Instruction manual - XS Wireless Digital (HTML) Download

      Interactive instruction manual for all products of the Sennheiser XS Wireless Digital series.

    • Instruction manual - XS Wireless Digital (PDF) (10 MB) Download

  • EU-overensstemmelseserklæringen
    • EU-overensstemmelseserklæringen XS Wireless Digital (580 KB) Download

  • Sikkerhedshenvisninger og informationer om regler
    • Safety instructions, specifications and manufacturer declarations - XSW-D series (860 KB) Download

    • Specifications and manufacturer declarations - XSW-D Pedalboard Receiver (680 KB) Download